Send us your controller model, card type and install environment. We'll shortlist compatible hardware and quote within 24 hours.
A hydraulic closer for returning compatible doors to the locking position. Compare door weight, width, mounting space and swing conditions before using it in an access-control door set.
Surface-mounted hydraulic door closer, EN size 4, for doors up to 80 kg and 1,100 mm wide, with two-stage speed control, backcheck and a 1,000,000-cycle rating.
CL-110 is a hydraulic door closer listed as EN size 4, for doors up to 80 kg (176 lb) and 1,100 mm (43 in) wide. Treat width and weight as separate selection checks. Wind pressure, door seals and the actual hinge condition can also affect the force needed to close the leaf.
The closer helps the lock re-engage by returning the door to its intended resting position. It does not correct a misaligned strike or armature. Check body and arm mounting clearance, particularly on narrow headers or where a maglock occupies the same space.
Commission the closing movement with the selected lock installed. Confirm the door reaches the latch or bolt position consistently without striking the frame. Include door dimensions and mounting photos when requesting the closer with a complete hardware package.
Maglock wiring with dry-relay COM/NC: keypad and reader diagrams, REX signals, approved egress release paths and manufacturer-specific suppression.
A fail-safe lock releases when power is cut; a fail-secure lock stays locked. Learn which to use per door, how to wire NO/NC, and what egress codes expect.
Program a standalone access control keypad: enter programming mode, change the master code, add card and PIN users, set relay time, reset and wire it.
Plan an RFID vehicle access control system: UHF windshield tags, long-range lane readers, Wiegand controllers and barrier triggering. Lane BOM and samples.
Apartment building access control hardware: anti-clone readers with matched fob sets, QR visitor codes, 4G controllers for rentals and UHF tags for gates.
Gym access control system hardware for 24/7 clubs: fob and wristband readers, face and QR terminals, anti-passback controllers and no-touch exit buttons.
The product specifies a maximum 80 kg door weight and 1,100 mm door width, with EN size 4 closing force. Check both dimensions and the mounting conditions.
No. The bolt and strike must first be aligned. The closer then needs adjustment so the door returns consistently to that position.
Possibly, if mounting clearances allow it. Compare both drawings with the available header and arm path before selecting the arrangement.
Send your card type, interface and quantity. You get a quote, lead time and compatibility notes within 24 hours — samples available for most items.
