Send us your controller model, card type and install environment. We'll shortlist compatible hardware and quote within 24 hours.
HF and NFC boards for UID capture, card memory operations and selected multi-protocol workflows. Match the specific protocol, read mode, host interface and antenna connection to your design.
Board-level 13.56 MHz reader/writer with on-board antenna and SAM interface pins, offered in ISO14443A, APDU, A/B and ISO15693 builds with TTL or Wiegand output.
Tiny USB CCID smart-card reader module that adds PC/SC-accessible 13.56 MHz card reading to tablets, PCs, kiosks and ticketing terminals via an external antenna.
USB-powered 47 × 26 mm multi-protocol HF module with built-in or external antenna, optional FeliCa, and SDKs for Windows, Android and Linux.
47 × 26 mm HF module reading ISO14443A/B, ISO15693 and NFC tags, with Wiegand or 3.3 V UART output, on-board or external antenna, and an optional FeliCa version.
Small-footprint 13.56 MHz read/write module that drives your own antenna through a 1.25 mm connector, with TTL, I2C or Wiegand output and Type A, APDU and A/B builds.
38 × 29 mm ISO14443A module that reads card UIDs and reads/writes MIFARE Classic sectors, available with TTL, Wiegand 34 or RS232 output.
30 × 16 mm embedded module pairing Bluetooth LE 5.1 with 125 kHz and 13.56 MHz card reading, for terminals that must accept cards, tags and phones.
47 × 26 mm module with on-board antenna that reads 125 kHz EM cards, or EM plus 13.56 MHz MIFARE/DESFire/NTAG, over USB or a UART/Wiegand connection.
1.9 mm thin, 47.7 × 25 mm HF module with an integrated antenna and 3.3 V TTL UART, for card reading inside tablets, handhelds and other slim hosts.
30 × 16 × 8.9 mm module reading EM4100-family 125 kHz cards and ISO14443A/B MIFARE, DESFire and NTAG credentials through one 3.3 V UART, with external LF and HF antennas.
Compact 5 V TTL module with an external antenna for iCLASS-compatible card reading and writing, plus UID reading of MIFARE Classic, Ultralight, DESFire and NTAG2xx cards.
30 × 16 × 8.9 mm ISO14443A/B reader for MIFARE, DESFire, Ultralight and NTAG with a 3.3 V TTL UART, auto or command-triggered reads, and an external 50 Ω antenna.
Slim 13.56 MHz UID module for MIFARE Classic, Ultralight, NTAG and ISO14443 Type B cards, supplied as a dedicated TTL UART build or a USB build.
50 × 10 mm 13.56 MHz module that returns ISO14443 Type A and Type B card UIDs, with TTL UART, USB and a buzzer drive pin on one 7-pin header.
Entry-level 50 × 10 mm module that reports ISO14443A/B card UIDs to a TTL or USB host, for handhelds, smart locks and logistics devices.
The HF range includes slim UID readers, MIFARE Classic read/write boards, multi-protocol modules and a USB CCID PC/SC configuration. Some builds support ISO/IEC 15693 or FeliCa; others are limited to the listed ISO/IEC 14443 operations. Select by the exact task instead of treating NFC as one interchangeable feature.
Check whether the application needs a card serial number, sector data, command exchange or writing. Any authenticated operation also needs an agreed key and provisioning process. A UID-only board cannot be upgraded to protected-data reading through a different output format.
For integration, compare onboard and external antennas, supply voltage and the interface variant. HF-200 is the PC/SC option; several other HF models use UART, Wiegand or USB modes. The reader-module checklist helps prepare an evaluation that includes the enclosure and host software.
Compare Wiegand, OSDP and RS485 reader interfaces: wiring, cable limits, AES-128 Secure Channel and steps for a compatible access-control migration.
125 kHz cards are cheap but easy to clone; 13.56 MHz cards add memory and, on DESFire-class chips, AES security. Compare range, chips, security and migration.
Wiegand 26-bit is an even parity bit, 8-bit facility code, 16-bit card number and odd parity bit. Convert card numbers to hex and back with the calculator.
Elevator card readers for car panels and lift lobbies: anti-clone encrypted cards, QR codes for visitors, Wiegand or RS485 output to the floor controller.
Turnstile card readers, QR scanners and face terminals for tripod, swing and speed gates, with Wiegand, RS485, RS232 or TTL output to the gate board.
Build an RFID asset tracking system: on-metal, ceramic and tie-on tags matched to each asset, handheld audits, smart cabinets and IP67 HF heads for tooling.
HF-200 lists USB CCID PC/SC. Other USB HF modules use different interface modes, so confirm the required host workflow.
No. Choose a module whose read/write commands explicitly support the required operation and provide the authorized card keys.
No. Protocol coverage varies by model and build. Verify the product table and ordered variant.
Send your card type, interface and quantity. You get a quote, lead time and compatibility notes within 24 hours — samples available for most items.
