QR Code Readers for Access Control (QR + 13.56MHz)

Readers that scan printed or phone-screen QR codes plus 13.56 MHz cards and pass the data to your controller or turnstile board. Outputs by model include Wiegand, RS485, RS232, TTL, USB, OSDP v2.2 or TCP/IP, in IP67 metal, mullion, glass and embedded formats.

9 product families · samples available · reply within 24 h
QC-170

OSDP QR Code & RFID Reader, 125 kHz/13.56 MHz + BLE

Ultra-thin IP65 metal reader that scans QR and dynamic QR codes, reads 125 kHz and 13.56 MHz credentials and BLE 5.3, and outputs Wiegand, RS485 or OSDP v2.2.

QR / 1D codes, 125 kHz + 13.56 MHz cards, BLE 5.3Wiegand, RS485, OSDP v2.2Codes 3–14 cm; cards 0–3 cm
Details →
QC-180

QR Code Reader Module for Turnstiles, 13.56 MHz, IP65

Embedded IP65 QR code and 13.56 MHz card module for turnstiles and kiosks, with 3–20 cm QR range, 9–24 V DC input and Wiegand + USB plus RS485, RS232 or TTL.

QR / 1D codes + 13.56 MHz cardsWiegand + USB + RS485 / RS232 / TTLQR 3–20 cm; cards 0–5 cm
Details →
QC-110

IP67 QR Code & 13.56 MHz Card Reader with Touch Keypad

IP67 metal-frame reader that scans printed or on-screen QR codes and 13.56 MHz card UIDs, with a touch keypad and Wiegand, RS485 and USB outputs.

QR / 1D codes + 13.56 MHz card UIDWiegand, RS485, USB5–18 cm
Details →
QC-130

IP67 Metal QR Code & 13.56 MHz Card Reader, Keyless

Keyless 120 × 80 mm IP67 reader for QR codes and 13.56 MHz card UIDs, with dual fill lights and Wiegand, RS485 and USB outputs to your existing controller.

QR / 1D codes + 13.56 MHz card UIDWiegand, RS485, USB5–18 cm
Details →
QC-120

Mullion IP67 QR Code & 13.56 MHz Reader with Touch Keypad

Narrow 138 × 58 mm mullion reader that scans QR codes and 13.56 MHz card UIDs through an IP67 glass front, with touch keypad and Wiegand, RS485 and USB outputs.

Mullion, 138 × 58 × 22.67 mmQR / 1D codes + 13.56 MHz card UIDWiegand, RS485, USB
Details →
QC-140

Slim Mullion IP67 QR Code & 13.56 MHz Card Reader

Keyless 138 × 58 mm mullion reader that decodes QR codes and 13.56 MHz card UIDs behind an IP67 glass front, with Wiegand, RS485 and USB outputs.

Mullion, 138 × 58 × 22.67 mmQR / 1D codes + 13.56 MHz card UIDWiegand, RS485, USB
Details →
QC-160

QR Code & 13.56 MHz Card Reader with Relay, Optional TCP/IP

86 × 86 mm QR code and 13.56 MHz card reader with 80 ms average decode, relay contacts and Wiegand, RS485 and USB outputs; a TCP/IP Ethernet version is available.

QR / 1D codes + 13.56 MHz card UIDWiegand, RS485, USB, relay; TCP/IP on QC-160-M-NET80 ms (average)
Details →
QC-190

86-Box QR Code & NFC Card Reader, Glass Panel, IP54

86 × 86 mm black glass-panel reader for QR codes and 13.56 MHz cards, with MIFARE sector encryption, chasing-light LEDs, IP54 and Wiegand + USB plus a serial port.

QR / 1D codes + 13.56 MHz cardsMIFARE sector encryption, CPU card contentWiegand + USB + RS485 / RS232 / TTL
Details →
QC-150

QR Code & Encrypted 13.56 MHz Card Reader with Relay

Tempered-glass QR code reader with encrypted MIFARE sector and CPU-card reading, NO/COM/NC relay contacts, and Wiegand, RS485 and USB outputs.

QR / 1D codes + 13.56 MHz cardsMIFARE sector and CPU-card encryption, or UIDWiegand, RS485, USB, relay (NO/COM/NC)
Details →
Buyer's notes

How to choose qr code & rfid readers

These are reader-mode QR scanners. They decode a code and send its content to a controller, turnstile board or PC. Your visitor-management, ticketing or access platform issues the codes and validates them, including dynamic QR codes. Every model also reads 13.56 MHz cards, and one multi-technology model adds 125 kHz EM and Bluetooth LE.

Choosing a model

  • IP67 metal frame: 120 × 80 mm or 138 × 58 mm mullion, with or without a touch keypad. Outputs are Wiegand, RS485 with active upload, and USB. QR range is 5–18 cm.
  • 86 mm glass-front models: relay contacts on two models, optional TCP/IP Ethernet on one, and encrypted MIFARE sector or CPU-card reading on two.
  • Ultra-thin 86 mm metal: IP65, with QR, 125 kHz + 13.56 MHz cards, BLE and OSDP v2.2.
  • Embedded IP65 module: fits turnstile flanges and speed gates. It outputs Wiegand + USB plus RS485, RS232 or TTL, and reads QR codes at 3–20 cm. See turnstile readers.

Integration pitfalls

  • Wiegand limits: Wiegand carries only a fixed-length number, 24 data bits in 26-bit or 32 in 34-bit. The QR payload must map to a numeric ID of that size. For full strings, use a serial, USB or TCP/IP output.
  • Test before ordering: send a sample code and your controller model, and we will confirm how it will be output.
  • Relay use: relay ratings and trigger logic on the relay models must be confirmed before you switch a lock directly.

For codes that expire, how screenshots are handled, and 4G gate units, read QR Code Access Control.

QC-170 lists OSDP v2.2. Compare it with the card-focused CR-300 in the OSDP reader buying guide, and test how your controller interprets QR data, expiry and keypad input before volume ordering.

Learn & apply

Guides and applications

Elevators

Elevator Access Control Readers

Elevator card readers for car panels and lift lobbies: anti-clone encrypted cards, QR codes for visitors, Wiegand or RS485 output to the floor controller.

Frequently asked questions

Can a QR code reader send QR data over Wiegand?

Yes, but Wiegand carries only a fixed-length number: 24 data bits in Wiegand 26 and 32 in Wiegand 34. Your platform's QR content must map to a numeric ID of that size. For longer or alphanumeric payloads, use RS485, RS232, TTL, USB or TCP/IP where the model offers it.

Do these readers support dynamic QR codes?

They decode static and dynamic QR codes. Generating and checking time-limited codes is the job of your access platform or controller, because the reader does not know whether a code has expired.

Can a QR reader open the door without a controller?

Most models are reader-mode and need a controller or turnstile board to decide access. Two 86 mm models have NO/COM/NC relay contacts, but relay ratings and trigger logic must be confirmed before you switch a lock directly. For self-contained units, see our QR code access controllers.

Which QR reader fits inside a turnstile?

The embedded IP65 module (71 × 65.54 × 19.4 mm) fits behind a turnstile flange or speed-gate panel. It outputs Wiegand + USB plus RS485, RS232 or TTL to match the gate board. For narrow posts, the 138 × 58 mm mullion models are an alternative.

Sourcing qr code & rfid readers?

Send your application, required hardware, interfaces and quantity. You get a quote, lead time and compatibility notes within 24 hours — samples available for most items.

sales@valenid.com WhatsApp inquiry

Request a quote

Tell us the product and the quote, sample or document you need. We reply within 24 hours on working days after receiving your message.

Describe the job, interface or tag/card type, and installation conditions. If you need help choosing a model, tell us what equipment you use and what it should do. Unknown details can be marked "to confirm".

We reply within 24 hours on working days. Your details are used only to answer this inquiry — see our privacy policy.