PC-120 Desktop RFID Card Reader/Writer, USB, 107 mm Square

Square 107 mm USB desktop reader: 125 kHz EM or 13.56 MHz UID read-only versions, plus encoders for MIFARE Classic sectors, CPU cards, DESFire EV1 files and NTAG.

  • 107 × 107 × 24 mm square desktop housing for reception and enrollment counters
  • Four versions: 125 kHz EM read-only, 13.56 MHz UID read-only, sector encoder, CPU/NTAG encoder
  • Reads UIDs of MIFARE Classic, DESFire EV1/EV2/EV3, MIFARE Plus, Ultralight, NTAG2xx and CPU cards
  • MIFARE Classic 1K/4K sector read/write and key change on PC-120-MS and PC-120-MS-N
  • PC-120-MS-N adds DESFire EV1 file, CPU-card and Ultralight/NTAG2xx read/write
Frequency
125 kHz or 13.56 MHz (by version)
Standards
ISO/IEC 14443A/B
Interface
USB, driver-free
Read range
≥ 30 mm (card-dependent)
Power
5 V DC via USB, ≤ 150 mA
Dimensions
107 × 107 × 24 mm
Reply within 24 hours Tested before dispatch Worldwide shipping

Desktop RFID Card Reader/Writer, USB, 107 mm Square: overview

The PC-120 is a square USB desktop reader for card enrollment and encoding at front desks, security offices and membership counters. Its 107 × 107 × 24 mm footprint gives staff a generous target for presenting a card, and it uses the host's 5 V USB port. The records describe driver-free USB and list Windows, Android and Linux; confirm the actual USB mode, OS version and application with a sample.

Four versions cover the usual desk jobs. PC-120-E reads 125 kHz EM4100, EM4102 and EM4200-compatible cards and fobs, while PC-120-M reads 13.56 MHz UIDs from MIFARE Classic, DESFire, MIFARE Plus, Ultralight, NTAG2xx and CPU cards. PC-120-MS adds MIFARE Classic 1K/4K sector read/write and key changes through host software. PC-120-MS-N further supports CPU-card writing, DESFire EV1 application files and Ultralight/NTAG read/write.

Read-only versions send the card number in a format you configure in software, so it matches the numbering held in your access or attendance platform. PC-120-MS-N switches between active output and passive, command-driven operation, and its active output format can be configured too. Firmware updates are applied online.

Integration notes

Expect a read distance of 30 mm or more depending on the card and surroundings, with each read finishing in under 100 ms. Operating current is 150 mA or less. The reader is rated for −10 to +60 °C at 15–90% relative humidity. If you need a smaller rectangular unit with a metal frame or ICODE, iCLASS and FeliCa support, look at the PC-110 instead.

For mixed NTAG and ICODE credentials, use the ISO 14443 vs ISO 15693 compatibility guide. PC-120 does not list ISO/IEC 15693 support; select and test a documented protocol-specific configuration instead of relying on the 13.56 MHz frequency alone.

More features

  • Driver-free USB, 5 V bus power, ≤ 150 mA; Windows, Android and Linux
  • Configurable card-number output format; online firmware update

PC-120 specifications

RF & credentials

Frequency125 kHz (PC-120-E); 13.56 MHz (all other versions)
StandardsISO/IEC 14443A, ISO/IEC 14443B
125 kHz credentialsEM4100, EM4102 and EM4200-compatible thick cards, thin cards and key fobs
13.56 MHz UID readingMIFARE Classic Mini/EV1, MIFARE DESFire EV1/Light/EV2/EV3, MIFARE Plus S/X, MIFARE Ultralight/Ultralight C/Ultralight EV1, NTAG2xx and CPU (microprocessor) cards
Read/write functionsBy version; see the version comparison table
Read distance≥ 30 mm (depends on card type and environment)
Read time< 100 ms within read distance
Read speed0.2 s
Interval between reads0.5 s

Interfaces & software

Host interfaceUSB, driver-free
Operating systemsWindows, Android, Linux
Output formatCard-number format configurable in software
Reading modesActive or passive, switchable (PC-120-MS-N)
FirmwareOnline update supported

Electrical

Supply5 V DC via USB
Current≤ 150 mA

Mechanical & environment

Dimensions107 × 107 × 24 mm
HousingSquare desktop housing
Operating temperature−10 to +60 °C (14 to 140 °F)
Storage temperature−20 to +70 °C (−4 to +158 °F)
Operating humidity15–90% RH

Version comparison

FunctionPC-120-EPC-120-MPC-120-MSPC-120-MS-N
Frequency125 kHz13.56 MHz13.56 MHz13.56 MHz
EM4100/EM4102/EM4200 card readYes———
13.56 MHz UID read (MIFARE, DESFire, Plus, Ultralight, NTAG2xx, CPU)—YesYesYes
MIFARE Classic 1K/4K sector read/write, key change——YesYes
CPU card: encrypted content read, card write———Yes
DESFire EV1 application file read/write———Yes
Ultralight / Ultralight C / NTAG2xx read/write———Yes
OperationOutputs card numberOutputs card numberDriven by host softwareActive output or host commands
Configurable output formatYesYes—Yes (active mode)

Specifications can change between production batches. Confirm the current revision with us before placing volume orders.

Ordering options

Request a quote for a configuration below, or add one or more to your inquiry list. Not sure which configuration fits? Send us your controller model and project requirements.

SKUConfigurationActions
PC-120-E 125 kHz EM read-only square desktop reader (EM4100/EM4102/EM4200-compatible), configurable output
PC-120-M 13.56 MHz UID read-only square desktop reader for MIFARE, DESFire, Plus, Ultralight, NTAG2xx and CPU cards
PC-120-MS 13.56 MHz reader/writer: UID reading plus MIFARE Classic 1K/4K sector read/write and key change
PC-120-MS-N 13.56 MHz reader/writer: adds CPU-card writing, DESFire EV1 files, Ultralight/NTAG read/write, active/passive modes

Where the PC-120 is used

  • Registering new employee badges at an HR or security desk
  • Writing sector keys and data to MIFARE Classic cards for an apartment or elevator system
  • Issuing NTAG2xx membership cards at a gym front desk
  • Checking a returned card's UID before re-issuing it to a new user
Elevators

Elevator Access Control Readers

Elevator card readers for car panels and lift lobbies: anti-clone encrypted cards, QR codes for visitors, Wiegand or RS485 output to the floor controller.

PC-120 FAQ

How does the PC-120 differ from the PC-110?

Up to the MS-N tier the card functions are the same. The PC-120 uses a 107 × 107 × 24 mm square housing, while the PC-110 measures 110 × 80 × 16.2 mm, has a metal middle frame and offers an extra ICODE/iCLASS/FeliCa tier.

Can the read-only versions write cards?

No. PC-120-E and PC-120-M only read card numbers. Choose PC-120-MS for MIFARE Classic sector writing, or PC-120-MS-N for CPU-card, DESFire EV1 file and NTAG writing.

Is a driver needed?

The listed USB interface is described as driver-free, with Windows, Android and Linux hosts listed. Confirm the actual USB mode, OS version, configuration tool and application with a sample; driver-free does not by itself establish keyboard emulation or PC/SC support.

Does it read ICODE (ISO/IEC 15693) tags?

No PC-120 version lists ISO/IEC 15693 support. PC-110-MS-N-IC, PC-140-D-N and PC-150-M-N list ICODE or ISO/IEC 15693 coverage. Confirm the exact chip, operation, command set and host software with a sample before ordering.

How fast is a read?

A card inside the read distance is read in under 100 ms. Rated read speed is 0.2 s, with 0.5 s between consecutive reads.

Before you buy

Related buyer guides

PC-140

Dual-Frequency USB RFID Reader/Writer, HID/CDC Switchable

One desktop unit for 125 kHz EM and 13.56 MHz MIFARE, DESFire, ICODE, CPU and NFC Forum tags, with switchable USB HID/CDC modes and active or command-driven reading.

125 kHz + 13.56 MHzISO/IEC 14443A/B, 15693, 18092USB HID / CDC, switchable
Details →
PC-110

USB RFID Reader/Writer, 125 kHz & 13.56 MHz, Metal Frame

Metal-framed USB desktop reader in five versions, from 125 kHz EM and 13.56 MHz UID read-only up to MIFARE sector, DESFire, NTAG and ICODE read/write. Driver-free.

125 kHz or 13.56 MHz (by version)ISO/IEC 14443A/B, ISO/IEC 15693USB, driver-free
Details →
PC-150

13.56 MHz USB NFC Reader/Writer with Dual SAM Slots

HF desktop reader/writer for MIFARE, DESFire, FeliCa, ICODE, CPU and NFC Forum Type 1–5 tags, with two SAM slots, 0–4 cm range and switchable USB HID/CDC.

13.56 MHzISO/IEC 14443A/B, 15693, 18092, 78162
Details →
PC-130

Compact USB RFID Card Reader, 125 kHz, 13.56 MHz or Dual

Compact USB desktop reader for 125 kHz EM or 13.56 MHz card-number capture. Choose a single-band or dual-frequency version; PC-130-D-MS also reads and writes MIFARE Classic 1K/4K sectors.

125 kHz, 13.56 MHz or dual (by version)ISO/IEC 14443A (13.56 MHz)USB; confirm host mode by SKU
Details →
CA-110

ABS RFID Key Fob, 125 kHz / 13.56 MHz

Pocket-size ABS key fob credentials with LF or HF chip options, custom colors and identification printing; listed read distance is 5–10 cm.

125 kHz or 13.56 MHz5–10 cm, reader dependentABS, epoxy filled
Details →
CA-190

SUS304 Metal RFID Key Fob

Stainless-steel and ABS key fobs with five chip configurations, including DESFire EV3; listed read distance is 0–3 or 0–4 cm by chip.

SUS304 stainless steel / ABS125 kHz or 13.56 MHz49.2 × 38 × 6.9 mm ±0.5 mm
Details →
CA-120

Soft RFID Wristband, 65 / 74 mm

Wearable LF or HF credentials with 65 or 74 mm diameter options, multiple colors and a listed 2–5 cm reading distance.

125 kHz or 13.56 MHz65 mm / 74 mm; customizable2–5 cm
Details →
CA-150

NTAG213 / NTAG216 NFC Card, 85.5 × 54 mm

13.56 MHz ISO/IEC 14443A NFC cards using NTAG213 or NTAG216, with custom artwork, data writing and a 0–5 cm listed read distance.

13.56 MHzISO/IEC 14443ANTAG213 or NTAG216
Details →

Get pricing for the PC-120

Send your application, required hardware, interfaces and quantity. You get a quote, lead time and compatibility notes within 24 hours — samples available for most items.

sales@valenid.com WhatsApp inquiry

Request a quote

Tell us the product and the quote, sample or document you need. We reply within 24 hours on working days after receiving your message.

Describe the job, interface or tag/card type, and installation conditions. If you need help choosing a model, tell us what equipment you use and what it should do. Unknown details can be marked "to confirm".

We reply within 24 hours on working days. Your details are used only to answer this inquiry — see our privacy policy.