RFID Asset & Tool Tracking
Build an RFID asset tracking system: on-metal, ceramic and tie-on tags matched to each asset, handheld audits, smart cabinets and IP67 HF heads for tooling.
Send us your controller model, card type and install environment. We'll shortlist compatible hardware and quote within 24 hours.
Compact 30 × 15 × 1.2 mm on-metal UHF sticker. Catalog references: 0.6 m with a 4 W fixed reader and 0.3 m with an R2000-based handheld; confirm mounted performance with samples.
OM-140 is a compact flexible on-metal label. At 30 × 15 × 1.2 mm it is a candidate for metal items with very little room for a tag: hand tools, small instruments, meters, medical device housings and compact IT accessories. Like its larger siblings it is printable and encodable, so each sticker can carry a human-readable ID next to the EPC.
The catalog gives on-metal read-range references of 0.6 m with a 4 W fixed reader and 0.3 m with an Impinj R2000-based handheld. Consider it for short-distance handheld checks, tool-crib counters and bench-top verification; qualify the required distance on the actual asset, reader and antenna setup. The power measurement basis, test asset and antenna configuration are not documented in the current records. The published configuration lists an Impinj Monza R6 chip and the 902–928 MHz band; confirm the exact chip and label revision before production.
The catalog describes flexible PET for curved surfaces and containers holding liquid. Confirm the adhesive, bend limits and relevant environmental ratings before approving the final mounting method; this description does not establish waterproofing, immersion suitability or a temperature rating. If the item has room for a larger label, OM-130 (55 × 15 mm) has a 3.5 m catalog reference on metal with a 4 W fixed reader, and OM-110 (65 × 35 mm) has a 6 m reference under US settings.
Test mounted samples with the reader model your staff will carry, recording the surface, label orientation, antenna and settings. Provide your exact industrial UHF RFID label printer model, firmware and media layout so compatibility can be confirmed and samples tested before production. Printing and EPC encoding in one pass requires a confirmed printer and media combination. For roll, artwork, EPC data and sample-acceptance requirements, use the printable on-metal label buying guide.
| Frequency band | 902–928 MHz |
|---|---|
| Chip | Published configuration: Impinj Monza R6; confirm exact chip/revision and memory before ordering |
| Air interface | Passive UHF, EPC Gen2 (ISO/IEC 18000-63) |
| Fixed reader (4 W), on metal | 0.6 m reference; power measurement basis and test setup not documented |
|---|---|
| Handheld reader (Impinj R2000-based) | 0.3 m reference, on metal; qualify on the project setup |
| Material | PET, flexible |
|---|---|
| Dimensions | 30 × 15 × 1.2 mm |
| Attachment | Adhesive label; adhesive specification and bend limits require confirmation |
| Suitable surfaces | Metal and containers holding liquid (catalog description); qualify the actual surface and environment |
| Customization | Printing and EPC encoding |
| SKU | Size (mm) | Build | Chip | Band | Fixed-reader reference, on metal | Handheld reference, on metal |
|---|---|---|---|---|---|---|
| OM-110 | 65 × 35 × 1.25 | Flexible PET, printable | Monza R6 (confirm revision) | 902–928 MHz | 6 m (US settings) | Not specified |
| OM-120 | 60 × 25 × 1 | Flexible PET, frangible | Monza R6 (confirm revision) | 902–928 MHz | 1 m | Not specified |
| OM-130 | 55 × 15 × 1.2 | Flexible PET, printable | Monza R6 (confirm revision) | 902–928 MHz | 3.5 m (4 W source) | 2 m (R2000-based) |
| OM-140 | 30 × 15 × 1.2 | Flexible PET, printable | Monza R6 (confirm revision) | 902–928 MHz | 0.6 m (4 W source) | 0.3 m (R2000-based) |
Catalog read-distance references on metal, not a common qualification test. Conditions are shown where documented; reader/antenna settings, metal geometry and power basis need confirmation with mounted samples.
Specifications can change between production batches. Confirm the current revision with us before placing volume orders.
Request a quote for a configuration below, or add one or more to your inquiry list. Send OM-140, quantity, delivery country, asset surface, reader band and distance, printer model, roll layout, artwork and EPC requirements.
| SKU | Configuration | Actions |
|---|---|---|
| OM-140 | Small flexible printable anti-metal UHF sticker, 30 × 15 × 1.2 mm, listed Monza R6 (confirm revision), 902–928 MHz | |
Build an RFID asset tracking system: on-metal, ceramic and tie-on tags matched to each asset, handheld audits, smart cabinets and IP67 HF heads for tooling.
The catalog quotes on-metal references of 0.6 m with a 4 W fixed reader and 0.3 m with an Impinj R2000-based handheld. Use these to shortlist a short-distance application, then check mounted samples at the required distance with the actual reader, antenna, surface and settings. The records do not include a complete test setup or a project-specific range guarantee.
OM-130 (55 × 15 mm) has a 3.5 m catalog reference on metal with a 4 W fixed reader, and OM-110 (65 × 35 mm) has a 6 m reference under US settings. These are selection references; compare mounted samples on the actual asset and reader setup before choosing a size.
The face accepts printing and the Monza R6 chip is writable. Provide the exact industrial UHF RFID label printer model, firmware and media layout so compatibility can be confirmed and samples tested before production. Printing IDs and encoding EPC data in one pass requires a confirmed printer and media combination.
Compare printable on-metal RFID labels by size, band and printer fit. Specify rolls, artwork and EPC data, then qualify samples before a bulk order.
Compare UHF RFID reader bands by country, including US, EU, UK, China, India and Japan. Understand ERP, EIRP, channel conditions and radio approvals.
Yes, RFID works on metal with tags built for it. See why metal detunes standard tags, compare ABS, PCB, ceramic and label tags, and test read range properly.
Longest-reading tag in our on-metal range: 13 m on metal with a 4 W fixed reader from a 69 × 23 × 7 mm ABS body. NXP UCODE 8; 902–928 and 866–868 MHz.
Flexible PET label, 65 × 35 × 1.25 mm, listed for 902–928 MHz. Catalog reference: 6 m on metal with a 4 W reader under US settings; qualify the printer and mounted samples.
Longest-reading PCB tag in our range: 10 m on metal with a 4 W fixed reader and 6 m with a handheld, in a 90 × 20 × 3.5 mm FR4 body. NXP UCODE 8.
Low-profile FR4 PCB on-metal UHF tag, 52 × 13 × 3.9 mm, NXP UCODE 8. Reads 8 m on metal with a 4 W fixed reader, 3.5 m with a handheld.
Bar-shaped ABS on-metal UHF tag, 135 × 22 × 12 mm, with an Impinj Monza 4QT chip. Covers 860–960 MHz; 8 m on metal with a 4 W fixed reader.
Narrow 55 × 15 × 1.2 mm flexible PET label for metal assets, listed for 902–928 MHz. Specify the print-and-encode workflow, roll construction and mounted sample acceptance before ordering.
Frangible PET UHF label, 60 × 25 × 1 mm, listed for 902–928 MHz. Catalog reference: 1 m on metal with a 4 W reader; confirm removal behavior and mounted sample performance.
Rectangular ABS tag for steel assets: 79 × 31 × 9.5 mm, Alien Higgs-9 chip, 860–960 MHz, 5–8 m on metal with a 4 W fixed reader, 2.5 m handheld.
Send your application, required hardware, interfaces and quantity. You get a quote, lead time and compatibility notes within 24 hours — samples available for most items.